JTEKT MACHINE SYSTEMS CORPORATION
Home>Products>Drive Shafts>HW Series
HW Series
Mainly used for Construction machinery and Industrial machinery.The dimensions of the Yoke are standardized worldwide,and the structure is such that the bearing cup is directly fixed.
Model numbers 5 to 12 have a highly sealed cross-bearing spline structure that can be adapted to particularly harsh environments such as muddy water and a lot of dust.
Size Table
| Model No. | Illustration example |
Rotational diameter（mm）D | Torque capacity（N・m） | Maximum operating angle（° ） |
||
|---|---|---|---|---|---|---|
| TR1) | TD2) | TS3) | ||||
| 4 | 1 | 115 | 466 | 1260 | 3310 | 25 |
| 2 | 116 | 25 | ||||
| 5 | 1 | 122 | 851 | 1770 | 4470 | 10 |
| 2 | 125 | 25 | ||||
| 6 | 1 | 149 | 1090 | 2240 | 6400 | 25 |
| 2 | 152 | 25 | ||||
| 7 | 1 | 158 | 1650 | 3760 | 9190 | 20 |
| 2 | 165 | 25 | ||||
| 8 | 1 | 216 | 2200 | 5380 | 12200 | 21 |
| 8.5 | 1 | 175 | 2570 | 7520 | 13500 | 25 |
| 9 | 1 | 220 | 3450 | 9980 | 18900 | 25 |
| 10 | 1 | 226 | 5580 | 13600 | 33900 | 25 |
| 12 | 1 | 302 | 8060 | 19300 | 47400 | 25 |
[Note] 1) TR indicates rated torque and is used for life calculation. ...Km (material confficient) = 1.
2) TD indicates the judgment reference torque for the maximum torque (Normal), and TD torque/Maximum torque >1.5 is desirable.
3) TS indicates the judgment reference torque for the breaking torque (Highest), and TS torque/Breaking torque >1.5 is desirable.
